Subject: Kenwood TH28 Mod
To transfer memories from one radio to another,you can clone two TH-28a's.
Each radio musteither have theME-1 installed or no ME-1 installed,butthey
both must be the same!
Radio Awill bethe radio that SENDS the memories!
Radio Bwill receive the memories!
1.Turn on RadioB and enter say144MHZ into allthe memories you are going to
CLONE TO.
2.Say radio A has 125 memories,enter 144MHZ into 125 ofradio B's memories.
This ENABLES orturns ON radio B's memories.
3.Turn both radios off then on.
4.Entera simplex frequency into both radios and make sure you use the VFO
mode.
5.Turn on radioA whilepushingbutton 7 at thesame time,the display should
read"CLONE".
6.Turn on radioB whilepushingbutton 7 at thesame time,the display should
read"CLONE".
7.PressPTT or push-to-talk on radio A!
8.You will heartones on both radios which go real fastand vary in pitch.
9.Leavethe radios for about 15-20 minutes so they can finish.
10.The tones will be repititous-this will indicate the transferwas successful.
11.Turnoff radio A,youmight hafto disconnect the battery.
12.Turnoff radio B,then check the memories.
This does work,I tried it myself 125 memory transfer in15 minutes PL's,odd
offsetsand all.Call channel isnot transferred!If thisdoes not work,try a
few times.
Specialthanks to N2OUMand N2PPT!
73 DE N2PPV
SOURCE: The QRZ Windows Ham Radio CDROM |