Icom IC-736 mod
By:
Dan Asbjornsen
KB7UXE
1, Remove power, antennas etc.
2, Turn rig upside down with front of rig facing
away from you, remove bottom cover
3, Looking at the back side of the front panel
"logic board"
just to the side of center, along the bottom (
actually now at the top) you'll see
diode D15, this is a typical non-surface mount
glass diode.
4, Clip this diode.
5, Reassemble rig.
Mod complete.
Not responcible for errors on your part.
Dan Asbjornsen
KB7UXE
SOURCE: The QRZ Windows Ham Radio CDROM |