|
|
| THE NL3ASD MODIFICATION FILES - THE HAM RADIO MODIFICATION - PAGES PAGES E TO H | HOMEPAGE |
Date: Sat, 29 Jul 89 09:55:06 edt Reply-To: PZS From: Pete_Simpson Subject: General coverage mod for YAESU FT-747GX CEO file contents: ------------------------------------------------------------------------------ General Coverage Mod for YAESU FT-747GX ------------------------------------------------------------------------------ 1) Remove top cover. 2) On backside of display unit, there is a brown jumper wire near the large ribbon cable. 3) Cut the brown jumper wire. 4) Turn the radio on and set the frequency to 12,345.6 KHz, then turn the radio off, then on again. 5) This enables the general coverage mode and a GEN display will come on and stay on at the top of the LCD display. 6) Reassemble the unit. It will now transmit everywhere it receives, however, Yaesu recommmends that it only transmit between 1.8 - 30 MHz. Disclaimer:I'm passing this on from someone who owns one of these and has done the mod. I have not done or tested this mod. You do it at your own risk. SOURCE: The QRZ Windows Ham Radio CDROM
Amsterdam
CLICK HERE AND YOU CAN VOTE FOR OUR FREE WEBSITES IN THE TOP 100 LIST
A TOP RANKING? USE THE ULTIMATE SOFTWARE SUITE FOR WEB SITE PROMOTION
SUBMIT YOUR WEB SITE NOW TO THE INTERNET TOP 50 OF SEARCH ENGINES FOR FREE
ALEXA BANNER THIS BANNER GIVES THE DALLY STATISTICS OF THIS FREE WEB SITE
The World of Free Packet Radio Software Amsterdam
The World of Free Packet Radio Software Amsterdam The Netherlands
| The World of Free Packet Radio Software Amsterdam The Netherlands - All Rights Reserved | Design By Interspire |
