|
|
| THE NL3ASD MODIFICATION FILES - THE HAM RADIO MODIFICATION - PAGES PAGES E TO H | HOMEPAGE |
Subject: FT-50 You take off the battery pack.. remove the sticker on the radio.. undo the screws (but not all of the way)-- you push on the screws and the keypad will come loose on the other side. Undo the screws all of the way to get access to underneath the keypad. There are 3 areas where there can be colser pads. Remove the #1 solder pad . AKA there should bo NO solder pads connected. Put the radio back together.. and reset the cpu and enable the Extended RX mod by using the "knob". It will now go just about everywhere. -- Sacramento .-. .-. / \ .-. .-. / \ / \ / \ .-. _ .-. / \ / \ /-ChrisMorgan KB6YBY--------/---\---/-\---/---\-----/-----\dude \ / \ / `-' `-' \ / \ / \ / `-' `-' \ / `-' `-'SOURCE: The QRZ Windows Ham Radio CDROM
| The World of Free Packet Radio Software Amsterdam The Netherlands - All Rights Reserved |