|
|
| THE NL3ASD MODIFICATION FILES - THE HAM RADIO MODIFICATION - PAGES PAGES E TO H | HOMEPAGE |
Date: Wed, 13 Sep 89 17:02:09 BST From: J.Heaton%manchester-computing-centre.ac.uk Subject: FT212 mods From: SV0DR To: YAESU FT 212RH extended freq. coverage mod. Remove the bottom and top covers and remove the front panel cover. You must then remove the front board by carefully unpluging it (try not to touch the lcd display). On the back of this board which is the control unit locate jumpers 1 through 12 and unsolder any that are soldered. All jumpers must be open (1-12 only). Reinstall the control unit and just turn on the radio for a few seconds. now turn it off again and remove the control unit again and solder jumpers 3, 4, 5, 11 only. Put everything back together and apply power. The display will read 000. Push the MHz button and rotate the main dial until 132.000 reads on the display, then press D/MR once. Now press again the MHz button and rotate to 180.000 and press the D/MR again. the radio is now programmed to operate from 132 to 180 mhz. mine has tx and rx through the entire spectrum with excellent sensitivity from 136 to 178. Dont forget that transmitting outside the amateur band is not allowed so please consult your local athorities for a special permit. 73s and have fun.......de SV0DR John Heaton SOURCE: The QRZ Windows Ham Radio CDROM
Amsterdam
CLICK HERE AND YOU CAN VOTE FOR OUR FREE WEBSITES IN THE TOP 100 LIST
A TOP RANKING? USE THE ULTIMATE SOFTWARE SUITE FOR WEB SITE PROMOTION
SUBMIT YOUR WEB SITE NOW TO THE INTERNET TOP 50 OF SEARCH ENGINES FOR FREE
ALEXA BANNER THIS BANNER GIVES THE DALLY STATISTICS OF THIS FREE WEB SITE
The World of Free Packet Radio Software Amsterdam
The World of Free Packet Radio Software Amsterdam The Netherlands
| The World of Free Packet Radio Software Amsterdam The Netherlands - All Rights Reserved | Design By Interspire |
