|
|
| THE NL3ASD MODIFICATION FILES - THE HAM RADIO MODIFICATION - PAGES PAGES A TO D | HOMEPAGE |
Newsgroups: rec.radio.amateur.misc From: wa2ise Subject: Alinco DR1200t full band mod file Message-ID: <1992oct4.161109.13943Keywords:mods Sender: newscopied from packet:Msg# TSF Size #Rd Date Time Arrived Seq # Msg ID Route 1020 BF 1405 0 22-Sep 2223z 29-Sep (033727 - 26390_KB2NEX) [] N2ROC ==> ALLModification Step 1 Remove 2 screws located on top of cover Step 2 Loosen the 4 screws on both sides of top cover (do not remove) Step 3 Remove top cover Step 4 Locate Yellow wire Loop behind tuning Knob (this wire loops from the control board mounted on front pannel) Step 5 Cut loop and tape ends Step 6 Replace top cover Step 7 Reset radio (press 'F' and VCO/M keys together While holding down keys turn off and on Power) Factory settings will be restored however the new frequency range will be from 132 to 173 MHz Any memory will have to be reprogramed These insructions are from Alinco, I've done them to my set and it works great *** END OF MSG # 26320 from N2ROC ========================================================================= Note:I haven't tried or verified this, proceed at your own risk WA2ISE -------------------------------------------- Newsgroups: rec.radio.amateur.misc From: kd1hzOrganization: The Rhode Island Internet Systems Cooperative Network Date: Sun, 04 Oct 1992 20:03:05 GMT Message-ID: <1992oct04.200305.9906References: <1992oct4.161109.13943Keywords:mods Lines:18 wa2iseModification This modification also works on the DR112 and DR110 radios Frequency range when applied: 130.000 - 169.995 340.000 - 379.995 870.000 - 889.995 MD Copied from QRZ, The Windows Ham Radio CDROM Source QRZ: The Windows Ham Radio CDROM |
| The World of Free Packet Radio Software Amsterdam The Netherlands - All Rights Reserved |