THE NL3ASD MODIFICATION FILES - THE HAM RADIO MODIFICATION - PAGES PAGES A TO D | HOMEPAGE |
From: 72277.550 Subject: MFJ - ALINCO & 9600 Date: 1 Feb 93 04:32:22 GMT Organization: UCSD Usenet Gateway Lines:32 Message-ID: <930201243222_72277.550_dhj69-1Nntp-Posting-Host: ucsd.edu Originator:daemonMFJ G3RUH modem with my Alinco 1200 data >>radio to connect to a Cluster high speed backbone network. It works great >>for me. I am wondering the mod that Alinco suggested to you?? There were >>several of them. The Mod was as follows:TRANSMITTER 1 Remove R-31 2 Remove C-40 (save this part, it is to be reused!) 3. Connect one leg of C-40 to PIN 7 of the VCO Board 4 Connect a jumper from the free leg of C-40 to the HOT end of C-35 The MIC input is now connected DIRECTLY to the VCO! RECEIVER 1 Disconnect the PINK wire connected to the MIC connector and the PC Board from the PC Board 2 Reconnect the PINK wire to PIN 2 on the IF Board connector This eliminates the low pass filtering on the discriminator! I am real happy to hear that at least one mfj & alinco works. Is this the mod you used??? Thanks Bob Ross n2oml internet - 72277.550 Amsterdam CLICK HERE AND YOU CAN VOTE FOR OUR FREE WEBSITES IN THE TOP 100 LIST A TOP RANKING? USE THE ULTIMATE SOFTWARE SUITE FOR WEB SITE PROMOTION SUBMIT YOUR WEB SITE NOW TO THE INTERNET TOP 50 OF SEARCH ENGINES FOR FREE ALEXA BANNER THIS BANNER GIVES THE DALLY STATISTICS OF THIS FREE WEB SITE The World of Free Packet Radio Software Amsterdam The World of Free Packet Radio Software Amsterdam The Netherlands
|